Drip kits

Share

Grekkon Limited is a drip irrigation company in Kenya with single and double emitter drip kits for vegetable or orchard drip irrigation in Kenya. These drip kits are installed on both open field, and greenhouse crops

An onion farmer in Wundanyi area of Taita Taveta county admiring his drip irrigation system after installation by Grekkon Limited

 

Our single or double emitter drip kits for sale start from the kadogo drip kit (kitchen gardens) to 1-acre drip irrigation kits. Many farmers seek where to buy drip irrigation systems in Kenya. At Grekkon Limited, they have the advantage of technical advice, and 4 months free field support. The latter upon their drip kit installation by the company

Garlic drip irrigation

A drip line in a garlic farm

How much is a drip irrigation system in Kenya?

Drip irrigation kit prices

Acreage
Size in Meters Square
Price in KES
Kadogo drip kit50 to 200KES 5,500 – KES 9,850
1/8th acre506KES 17,500
1/4 acre1,024KES 33,000
1/2 acre2,025KES 65,000
3/4 acre3,036KES 80,000
          1 acre       
               4,048                    
  KES 135,000

These are prices for 2 drip rows per bed

Our drip irrigation kit price is according to;

As an irrigation systems supplies company in Kenya, we provide drip irrigation pipes, and train on how to install drip lines to meet your drip irrigation requirements.

Regarded as the largest drip irrigation kits supplier in Kenya, we complement our systems with drip irrigation pipes for irrigation systems, and free agronomy trainings. These pipes are PVC and HDPE irrigation pipes. Every drip kit has a drip irrigation pressure regulator, be it by gravity flow or high pressure water pump driven

 

Half-acre drip irrigation kits by Grekkon Limited

Onion drip tapes laid on planting beds

There are 2 types of drip kits for smallholder farmers

  • Pre-perforated drip tapes. These are 0.3mm, 0.4mm, and 0.8mm thick. 8mm, 12mm, or 16mm in diameter, with emitters spaced at 1ocm, 15cm, 20cm, or 30cm. The 0.3mm and 0.4mm thicknesses are for vegetable crops irrigation. The 0.8mm thickness is for hedges and orchard irrigation
  • Button drippers. These are emitters attached to the surface of a 1mm thick, 16mm diameter HDPE pipe. They irrigate hedges, orchards and forestry.
 
Drip kits in Kenya- button drippers

A button dripper in a fruit orchard


Winnie, a smallholder urban farmer in Nairobi county whose drip irrigation system was set up by Grekkon Limited

Drip Kits FAQs

What are drip kits?

Our drip irrigation kits in Kenya consist of; a tank connector, a drip irrigation filter, HDPE or PVC pipe, and drip irrigation system fittings. A drip kit is an assembly of these items to create an irrigation system that primarily waters via the the drip emitters

What do you need for drip irrigation?

Drip Irrigation Requirements

1. A water source.
2. A water pump and piping mechanism to move this water from the source to the tank or directly to the drip irrigation system.
3. Water storage tank if you’re using gravity to irrigate
4. A tank connector
5. Pipes for the mainline and sub-main line.
6. Mainline and sub mainline fittings
7. Drip irrigation water filter
8. Drip irrigation pipes
9. Accessories; saddle clamps, tees, elbows, adaptors / connectors, and end caps
10. Ball valves

 

 1/4 acre kit by Grekkon Limited

2 drip line rows per bed in a tomato growing farm


How do you prepare land for drip irrigation in Kenya?

i. Plough to a fine tilth. First with a disc plow, then a harrow plough

ii. Prepare raised planting beds to a height of 30cm, and the width to 80cm, to 120cm depending on the crop type

iii. Maintain a bed to bed spacing of 30cm, to 40cm

How much does it cost to put in a drip system? What is the cost of drip kits?

The drip system costs given above are complete. They cover all material and labor for the unit area depending on the crop type

When is the best time to do drip irrigation?

Irrigation time. Early morning watering so that the soil warms during the day. Watering in the afternoon causes water loss to evaporation. Watering in the evening lowers the night soil temperature to a level that encourages root diseases

Which drip tape thickness should I use?

0.4mm thickness and above are well suited for tropical open field crops. 0.3mm drip lines in tropical locations will do in greenhouses where direct radiation is less

What is the right pressure for drip irrigation in Kenya?

Drip irrigation tapes in Kenya are designed to work under gravity pressure (from 1.5 meters head or 0.15 bar). The water pressure determines it’s dispersement in the soil. Low pressure discharge (<22.0L/hour) is best because the water goes deeper, and covers a narrower area whic discourages weeds growth

 

Low discharge emitters have better results

 

How much water is required for drip irrigation?/ How much water do I pass through my drip kits?

This depends on the crop and irrigation sequence. Generally, your soil will hold 16 cubic of water per acre for a good crop

How do I select my emitter spacing?

Emitter spacing is determined by crop spacing. Closer crops like onion, garlic, green beans have closer emitters at 15cm. Modretely spaced crops like tomato, strawberry, herbs have an emitter spacing of 20cm installed. Further spaced crops like peppers and chilies have an emitter spacing of 30cm in place. For fruit trees and forestry, the (button) emitter is physically installed where at the base of the crop

How long should I drip irrigate?

Water until the soil holds enough water without runoff.  The length of watering depends on the soil type. Sandy soils will run-off faste than loamy or clay soils. Choose the most appropriate length and frequency of irrigation according to your soil type

How exactly does drip irrigation work?

By allowing water to sip to the crop root zone slowly

 

How do you drip irrigate?

By allowing the drip emitters to irrigate until the soil around the root zone has enough moisture. Drip irrigation is done by opening the main water valve from the main tank/ source. Once the water gets to the farm, the farmer will open the respective valves to each block to irrigate block by block. The time of irrigation will depend on the flow rate and the water needed.

Why is drip irrigation expensive?

Because it utilises the most pipes, fittings, and accessories and the most installation labour.

How many emitters can I put on a drip line?

There is no limit to the number of emitters, put them according to the number of trees. Vegetable drip lines are pre-perforated and so one does not add emitters. The number of emitters depends on the emitter spacing on the drip line.

What are the two main types of drip irrigation?

  1. Pre-perforated drip pipes and button drippers
  2. Surface and sub-surface drip irrigation. The former is common, the latter is rarely practised and is expensive. Sub-surface drip irrigation is watering with drip emitters buried under the soil.  It allows for fertigation (liquid fertiliser application), drenching (soil pesticde application). and is the most water efficient method as none is lost to evaporation. These drippers are specially designed for that rola. Grekkon Limited manufactures sub-surface drip emitters on order

 

An illustration of sub-surface drip irrigation in maize

 

How to Install Drip Kits in Kenya

Time needed: 1 day.

How To Install Drip Lines

  1. Design.

    Make a detailed sketch outlay of the farm showing all relevant measurements and distances in meters

  2. Trench.

    Make trenches for the main and sub-main pipes if the system will be sub-surface. This applies for polyvinyl chloride (PVC) pipes that have to be buried because they have no ultra violet treatment which prevents rapid degradation by the sun. They also break easily. High density polyethylene pipes (HDPE) are surface pipes because they have UV treatment and do not crack easily

  3. Connections.

    Begin the connection at the tank or pump station

  4. Piping.

    Lay the PVC or HDPE main and sub-main pipes

  5. Emitters.

    Connect the drip lines and align the emitters

  6. Test

    Check your system for pressure, leakages, and sufficiency of water supply

  7. Check the flow rate

    Use a 1-liter container and determine how long it takes to fill up. This will give you your actual flow rate. The higher your emitter flow rate, the higher the rate of watering and less incidence of emitter clogging

Grekkon Limited- Irrigation Hub

Drip kit installation in Endarasha area, Nyeri county by Grekkon Limited

Drip kit Specifications

  • 0.3mm, 0.4mm and 0.8mm thick
  • have a flow rate of 1.6L/Hour to 2.4L/hour
  • 16mm in diameter
  • have double emitter spacing at either 15cm, 20cm, or 30 cm
Share this post
Established in 2017, Grekkon Limited is a Kenyan agribusiness company. It specialises in the provision of; - Irrigation systems - Greenhouse construction - Dam liners installation - Water pumps - Solar dryers construction - Agriculture nets - Borehole drilling The company has operations offices in Nairobi, Mombasa, Kisumu, Eldoret, Nyeri, Meru, and Nyahururu

Comments (149)

  • I’m from Nakuru,.need drip kit only without a tank.ive got an elevated tank and I can fix it alone.whats the cost of pipes alone plus fittings for an eighth of an acre

    Clement cheruiyot
    Reply
    • Dear Clement,

      This is Kes 16,000 for material only.

      Best regards,

      Customer Service

      Reply
  • I need to set up an drip irrigation system for grapes… 2m by 1.5 m

    Chellah
    Reply
    • Dear Chellah,

      This we are glad to set up for you. Please share your phone contact.

      Best regards,

      Customer Service

      Reply
  • Please contact me ASAP – October 25, 2021

    Samuel K Kiema
    Reply
  • Good afternoon,

    Kindly provide me with cost per acre for gravity drip irrigation kit.
    I intend to irrigate around 8 acres ASAP for:
    1. French Beans
    2.Tomato
    3. Onions
    4. corn
    5 Water melon
    6. Garlic
    7. Challis

    Regards
    Samuel K Kiema
    Tel 0706806725; 0717978832

    Samuel K Kiema
    Reply
  • Pingback:Borehole Drilling in Kenya | 0711 895635 | Grekkon Limited

  • Hello.I am based in burguret near nanyuki.I have water system in my 7 acres via milain pipe from river with pump and submain pipes in three acres.I want drip irrigation on all farm.Could you advise/quote or visit.Contact 0722925625

    Wahome
    Reply
    • Dear Wahome,

      This is well received. Our Nyeri team will reach you shortly.

      Best regards,

      Customer Service

      Reply
  • Pingback:Greenhouse construction in Kenya - Tel 0711 895 635 | Grekkon Limited

  • good evening..hoe can i get your service within coastal reagion

    mohamed
    Reply
    • Dear Mohamed,

      Please share your contact with us to reach you.

      Thank you

      Customer Service

      Reply
  • Have a five acre land want to utilise it with potatoes. Kindly give me drip irrigation kit required to start off. Beginning with the size of reservoir tank required. Thank you.

    Charles kinoti
    Reply
    • Dear Charles,

      To give you an accurate and detailed quote, a farm survey visit must be done. See the estimate cost and other details on potato irrigation in this link; https://grekkon.com/potato-irrigation-in-kenya/

      Your reservoir will hold at least 50 cubic meters of water

      Best regards,

      Customer Service

      Reply
  • Can I get a kit from Kisumu?

    Jacob Luballo
    Reply
    • Dear Jacob,

      Yes you will from our Kisumu office. Share your number or reach us there on 0759 000 911.

      Best regards,

      Customer Service

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Start typing and press Enter to search

Shopping Cart

No products in the basket.

Call Now Button