Rain gun Sprinklers
Our rain gun sprinklers for sale in Kenya specifications are of the new generation of high-volume, high-pressure rain gun sprinklers in Kenya. Our low-pressure rain gun sprinkler specification is 1” in diameter, with a throw of 12M in diameter
The larger ones; from 1-1/2″ throgh 2-1/2″ require high pressure. Rain gun sprinkler irrigation cost is lower than a drip system at the point of installation. However, rain gun sprinklers are more expensive to run than a drip irrigation system because they require a pump, while the latter will work with gravity flow. The cost of a rain gun sprinkler system installation is comparable to that of a rain hose kit
Rain gun pipes are; PVC or HDPE or delivery lay flat pipes, whose use is described in detail below.
How Much Does A Sprinkler System Cost In Kenya?
Rain gun sprinkler prices
PY series plastic rain gun sprinklers from 1.5″ to 2.5″ inlets on display at Grekkon Limited’s Eldoret store
- 1’’. Irrigation diameter 20M. Water discharge volume 4-5 cubic per hour. A booster pump for this rain gun will work
Kes 6,500
- 1.5’’. Irrigation diameter 30M to 45M. Water discharge volume 7-8 cubic per hour
| Rain gun Type | Price in KES | |
| Plastic | KES 5,000 | |
| PY 30 metallic | KES 13,500 | |
| RM metallic | KES 15,000 | |
| Flange metallic | KES 35,000 |
1″ inlet plastic rain gun sprinkler
1.5″ inlet RM metallic type rain gun
How much is flange rain gun?
This is Kes 35,000 for the 1-1/2″, and Kes 45,000 for the 2″
2’’. Irrigation diameter 40M to 60M. Water discharge volume 14-15 cubic per hour
| Rain gun Type | Price in KES | |
| PY metallic | KES 14,500 | |
| RM metallic | KES 17,000 | |
| Flange metallic | KES 60,000 |
2.5’’. Irrigation diameter 50M. Water discharge volume 23-25 cubic per hour
- Kes 16,000 for the PY 5o rain gun
Rain gun sprinklers cost per acre
Installation cost
The cost of a sprinkler system in Kenya is from Kes 65,000 an acre without the water pumping system. It varies with the types of rain guns and size. Before we install a rain gun sprinkler system in a farm, a site assessment visit is carried out to determine;
- the appropriateness of this overhead irrigation system to the crop
- the farm terrain
- amount of water available
- the water pump specs where one exists
2.5″ inlet giant flange type rain
Types of Rain Gun Sprinklers In Kenya
Our rain gun sprinkler types are;
- PY series. PY 30, PY 40, and PY 50
- Plastic
- RM
- Flange rain gun
Grekkon Limited introduced a new model of the rain-gun sprinkler to the Kenyan market; the double nozzle steel and brass Rain-gun series.
These Rain gun specifications are; 2 nozzles, a main top nozzle of 16mm, and a small underneath nozzle of 8mm. The purpose of the small nozzle is to eliminate any water shadow areas or sections within the irrigated farm that remain dry.
How to use a rain gun; choice of crops to irrigate
- Horticulture. cabbage, spinach, kales, carrot, onion, garlic, strawberry, and pineapple
- Broad-acre crops. wheat, barley, canola, sugarcane, and corn/ maize
- Fruit orchards. citrus (orange, tangerine, and lemon), avocado, macadamia, papaya, guava, mango, tree tomato, and passion
- Forestry. seedlings and mature trees
- Pasture crop. lucerne, Rhode grass5, and all other pasture grass
- Herbs. mint, lemongrass, geranium, tagete, and so on
- Hedge plants. kei apple, bougainvillea, cypress
- Lawns
Are rain gun sprinklers good for irrigation?
Crops that are easily susceptible to fungal infections as a result of dampness on their leaves such as tomatoes and peppers are better irrigated using the drip irrigation system method.
Our RG sprinklers work best at a pressure rating of 30M to 40M head or 3 bars to 4 bars of pressure. When determining a suitable water pump to power these sprinklers, one must consider the water discharge rate and the pressure rating. The water pump must meet these specs.
When connecting say 2 RGs of 2″ each to a water pump, the water discharged by the pump will be 15 cubics per hour by 2 units so 30 cubics per hour. The water pump water discharge specs must meet this specification. This however does not factor in frictional losses, which are determined by the; pipe diameter, the total horizontal and vertical pumping distances
Our flange type rain guns come with different detachable nozzle sizes
FAQs
A. How do you install a rain gun sprinkler?
- Lay the mainline which is connected to your high-pressure water pump
- Lay and connect the lateral or sub mainline to the mainline
- Connect the rain gun sprinkler to the sub mainline using a delivery lay flat pipe, an HDPE pipe or PVC pipe
B. How do you design rain gun irrigation sprinklers system?
The input pipe will be; PVC, HDPE, PPR, or a delivery pipe. Since the sprinklers work under high pressure, each of these pipe’s pressure rating should be a PN8 at the minimum. Each rain-gun sprinkler has a 1M steel tripod stand for support. The sprinklers can be manually adjusted to spray at any angle from 10 degrees to 360 degrees.
C. Can I use a booster pump for the rain gun?
Booster pumps for water gun irrigation work well when drawing water from a tank. Use it with the 1″ rain gun.
D. How do I assemble a rain gun irrigation system?
i.Check that your rain gun sprinkler has no damaged or loose parts
ii. Connect the rain gun head to the tripod stand
iii. Attach a PVC, HDPE, or delivery pipe to the rain gun sprinkler inlet at the base
iv. Adjust the water gun sprinkler to the desired angle of irrigation water delivery
v. Start your irrigation water pump
E. How much area does a rain gun cover?
This depends on the inlet size, type of RG sprinkler, pressure rating and flow rate. The table below provides details
| Type | Make | Inlet Diameter | Max Spray Diameter | Min Head (Pressure Rating) | Max Flow Rate |
| Flange (F) | Metallic (M) | 2″ | 60M | 40M | 60M3/ Hr |
| F | M | 1.5″ | 45M | 40M | 40M3/ Hr |
| PY 50 | Metallic | 2.5″ | 40M | 30M | 25M3/ Hr |
| PY 40 | Metal | 2″ | 35M | 30M | 17M3/ Hr |
| PY 30 | Metallic | 1.5″ | 30M | 30M | 8M3/ Hr |
| RM | Metal- Brass | 1.5″ | 30M | 30M | 8M3/ Hr |
| Plastic | Plastic | 1.5″ | 30M | 25M | 7M3/ Hr |
| RM | Metallic | 1″ | 20M | 30M | 6.5M3/ Hr |
| Plastic (P) | Plastic- Hard Black | 1″ | 12M | 10M | 3M3/ Hr |
| Plastic | P | 3/4″ | 7.5M | 10M | 2M3/ Hr |
| None Metallic | Plastic | 1/2″ | 5M | 10M | 1.5M3/ Hr |
When procuring a rain gun sprinkler, it is important to understand this tabulated information so a to settle on the most appropriate type
F. How much horsepower (Hp) does a rain gun sprinkler need?
This depends on the inlet size of your rain gun sprinkler, the larger it is, the greater the water discharged, and so the more horsepower required
1″ and 1.5″ from 8.5Hp
2″ and 2.5″ from 10Hp
G. What pressure is needed for a rain gun?
From a head of 30M or 3 bar
H. What is the difference between a sprinkler system and a rain gun?
A rain gun is large and covers a large area, thereby replacing several impact or pop up sprinklers
A porateble 16Hp engine, moderate pressure, high volume diesel water pump on display at Grekkon’s Athi River warehouse. This works pretty well with any raingun sprinkler
I. What size are rain guns?
1″, 1-1/2″, 2″ and 2-1/2″
J. What are the benefits of rain gun?
- It irrigates over a large swathe of farm land
- It irrigates over a short period of time due to its high water volume
- Chemicals and fertilisers can be aapplied via this sprinkler
- It is east to move about
- It is easy to assembly and disassemble
K. How much motor is required for a rain gun?
For electric pumps, motors from 2Hp will run these sprinklers depending on the size of the pump
L. What crops are irrigated by rain guns?
Vegetables, tree crops, lawns, pastures, and turf grass in sports arenas
How To Choose Rain Gun Sprinklers
- Diameter of spray. The choice of diameter of spray is determined by the acreage under irrigation. A grower with 10 acres will pick a larger diameter of spray than to a 1/4 acre farmer because s/he has a larger coverage.
- Flow rate. The flow rate preference is a factor of the crop type because different crops have different needs. A livestock farmer will grow his grass pasture well with a lower flow rate than a vegetable horticulture farmer. This is because the vegetables require much more water than grass. Another contributing factor to flow rate is the amount of water present, both must be aligned to avoid drying up the water source
- Pressure rating. This determines the water pump size to use with the sprinkler. The water pump’s head must be greater than the sprinkler’s to accommodate pressure losses during reticulation
Hello it’s me, I am also visiting this website on a regular basis, this web
site is in fact nice and the visitors are in fact sharing good thoughts.
My page … คาสิโนออนไลน์
Hi, I have 11acres if land and I have a big dam with full of water. I have watermelon in three acres and will require a water from the dam which is located quite distance from the side of the watermelon. I think I need the flange metallic. Could someone call me as I would like some more information about the sprinkler please. My number is 0743333670. Thanks
Ali
Good morning Ali,
Your request was forwarded to someone in our commercial team, who by nie must have contacted you, thanks
Best regards,
Customer Service
Please advise, i have one acre of land near the river, it begins from the river with about 4meters height(deep), a gentle slope with a distance of 170 meters from the river.
am considering to install solar irrigation system with sprinklers. Advice on which kind of a system and the price.
Good afternoon Amos,
A solar powered water pump will do the small sprinklers but not a rain gun sprinkler which requires high pressure
Please share your contact number on info@grekkon.co.ke for us to discuss this
Best regards,
Customer Service
Good afternoon kindly assist me on choosing the right type of sprinkler for my farm.my farm is approx 6.5 acres and well levelled. It is 220by 150 meters in length.i have a borehole 20ft long .i have an engine pump connection size 2inch, a max output of 27m cubed/hr and a max head of 22.5m.advice on the the type of sprnkler i can use and all the fittings needed and if possibly attach me the budget i need the system ready latest monday.am located in malindi a place called chakama.my number 0715546768 or 0743873946 thatss my wifes number .kindly reach out to me..help a young farmer out.
Good evening Dennis,
For your rain gun sprinkler cost, someone from our comnercial team will call you
Best regards,
Customer Service
I’m in Meru Kenya and I need a rain gun 1″ 20m and a booster asap.
I am interested in a rain gun to irrigate maize in nakuru I am using a submassive water pump 1inch
Good morning Brian,
For your rain gun sprinkler cost, we need to conduct a site assessment visit. Please share your contact number on; info@grekkon.co.ke for us to reach you
Best regards,
Customer Service
In case i have petrol water pump of 7HP then i happen to opt to do rice irrigation.Which rain gun sprinkler is suitable to select on a flat terrain
Good evening Ibra,
Your rain gun sprinkler size will depend on the outlet diameter of your water pump. If it is 2″ for instance then a 2″ rain gun and below will work. Again, it needs to be a high pressure water pump. The 7Hp only indicates the engine rating
Best regards,
Customer Service
Hi Grekkon, one acre shamba on a flat terrain
Pump size
-inlet outlet diameter 3″
-pump lift 28m
-suction height 7m
-60 cubic m/HR
-water source… continuous flowing river
What type of rain gun do you advice me to use?
Good evening Chepkwony,
Your rain gun water pump is of low pressure and high volume. It’ll work with any size below 2.5″ of the PY and Atom type rain gun sprinklers
However, it is unsuitable for the flange type rain gun sprinklers
Best regards,
Customer Service
Can cabbage do well with sprinkler irrigation system, in regard to pest and disease during dry season
Good morning Mutai,
Sprinkler irrigation on cabbage is encouraged when leaf sucking pests such as arphids affect your crop. It also helps raise humidity during the very dry months
Best regards,
Customer Service
Hi Grekkon. Kindly may I know if a 1″ or 1.5″ rain gun would work without pump if the area to be irrigated is steep and how I would determine flow rate with a given slope. Thanks
Good morning PK,
Our 1.5″ and 1″ rain gun sprinklers in Kenya work under gravity flow if the slope’s vertical height aligns with the pressure rating
These details will be advised during a site assessment visit or when procuring the rain gun sprinklers from any of our branches
Best regards,
Customer Service