Drip Irrigation Kit

Drip Irrigation Kit – 2 lines

Grekkon Limited’s drip irrigation kit installed as 2 drip lines per bed is a flexible system.  Our drip irrigation kit is wound through flower beds or borders, around trees or shrubs, run-down rows or raised vegetable beds and can be used in container planting. It is an inexpensive and effective method for watering a variety of plants and gardens.

Grekkon Limited’s drip irrigation kits is designed for smallholder farmers, kitchen gardens and hobby growers. We design each kit to specific parameters which makes them easy to assemble and install, quick to use and efficient in irrigation.

Our drip kits are as below

• Kitchen garden kits; 10M x 5M, 10M x 20M and 20M x 30M
• One eighth acre kits; 22.5M x 22.5M/ 506M square
• Quarter acre kits; 32M x 32M/ 1,024M square
• Half acre kits; 45M x 45M/ 2,025M square
• One acre kits 63.6M x 63.6M/ 4,048M square

Grekkon drip kits have these accessories;

The diameter size of each accessory is similar to the diameter size of the pipes used. We categorise these accessories and pipes as; 1/2” for kitchen gardens and an eighth of an acre, 3/4” for a quarter and half an acre and 1” for an acre

i. Water filter. This removes particles and silt to prevent clogging of the drip tape emitters

ii. Tank connector. This connects the pipe to the tank

iii. Male and female adaptors. They connect the filter, tank connector, and ball valve to each other. Their diameter size depends on the water pipe diameter

vi. Elbows. Drives the pipe down from the tank.

v. Tee.

vi. Elbows.

vii. Ball valve

viii. Water pipe

ix. Drip tape

x. Drip accessories. Off-takes, drip connectors, rubbers, and end caps.

DISCLAIMER
CLIENT TO PROVIDE:

-TANK
-STRUCTURE FOR TANK
-TRANSPORT OF MATERIAL TO SITE

https://local.google.com/place?id=4796513934895126646&use=posts&lpsid=7137811027867561619

https://grekkon.com/drip-kits/