Grekkon Limited

Grekkon Limited’s water pump pipes for sale in Kenya are;

1. Suction water pipe. This pipe delivers water from the source (reservoir, river, lake, tank, well) to the water pump. It is has hard circular plastic rings to prevent collapse as a result of intense suction pressure. The size of the suction pipe depends on the inlet water pump’s size. A water pump with an inlet of 2″ will work with a suction pipe of a similar size. A foot valve to prevent back-flow is at the end of this pipe. This is for large diesel water or electric water pumps. For all pumps, a conical sieve is at the end of it too to keep away solid matter

Every surface water pump; petrol, diesel or electric power driven has a suction head. This is the maximum depth at which the pump will draw water. It is given in meters to guide on the length of suction pipe to fix on that water pump’s inlet section

 

 

2. Delivery or lay-flat pipes. They are plastic or canvas pipes that deliver water from the water pump. Delivery pipes are popular in rain gun sprinkler irrigation systems, or when discharging water to a tank. Our sizes are 1-1/2”, and 2”. Depending on the water pump pressure, we have options of PN8, PN10 and PN12. Delivery or lay-flat water pump pipes surface pipes, they are not underground pipes (sub-surface)

 

Other Water Pump Pipes For Sale

3. High density polyethylene (HDPE) pipes. Our HDPE water pump pipes for sale in Kenya are in different diameter sizes. This is from 32mm (1″) to as large as the water pump outlet is. The thickness of the HDPE pipe to connect to your water pump depends on the water pump pressure. The thicknesses are; PN6 (for gravity flow or low pressure pumping) PN8, PN10, PN12.5, PN16, PN20, PN25. These pipes work as surface pipes because they have UV treatment. They are also sub-surface pipes

 

 

4. Poly vinyl Chloride (PVC) pipes. They are in different sizes. This is from 50mm to as large as the water pump outlet is. The thickness of the PVC pipe to connect to your water pump depends on the water pump pressure. The thicknesses are; PN6 (for gravity flow or low pressure pumping) PN8, PN10, PN12.5, PN16 and PN20. These pipes are sub-surface because they have no UV treatment