PVC is short for Polyvinyl Chloride. Our irrigation grade PVC pipes carry out irrigation installations within east Africa. We install different sizes and thicknesses of irrigation grade agricultural PVC pressure pipes according to land size and water pressure. Our agricultural PVC pipes constitute a large part of our irrigation pipes for sale in Kenya, and each PVC pipe size has a standard length of 6m. These irrigation pipes work with drip irrigation kits, sprinkler irrigation systems, and rain hose kits.
Available pipe sizes are; 32mm, 40mm, 50mm, 63mm, 75mm, 90mm, and 110mm. Other larger sizes are manufactured on order by our PVC pipes manufacturers in Kenya. In irrigation systems, the larger pipes are used as mains and the smaller ones as sub-mains.
The pipe size is determined by the amount of water required per area. Large farms will use large pipes, while small crop units will use small pipes.
Our retail prices are given upto 4 inch PVC pipe price PN 6 pipes only. Prices for other diameters and thicknesses are provided on request
| Pipe Diameter Size in mm | Inches | Price in KES |
| 32 | 1 inch | KES 350 |
| 40 | 1-1/4 inch | KES 545 |
| 50 | 1-1/2 inch | KES 730 |
| 63 | 2 inch | KES 1,150 |
| 75 | 2-1/2 inch | KES 1,575 |
| 90 | 3 inch | KES 2,300 |
| 110 | 4 inch | KES 2,730 |
| 140 | 6 inch | KES 4,500 |
| 160 | 8 inch | KES 5,680 |
| 200 | 10 inch | KES 9,000 |
| 225 | 12 inch | KES 11,365 |
i. Water pressure. The pressure at which water will flow within. For instance, a farmer whose water flow is gravitational will use the lowest gauge, which is PN6. Another grower using a water pump will use a thicker pipe that withstands the pump pressure. The greater the pressure from the water pump, the thicker the pipe is.
ii. External exposure. Some growers opt to lay pipes on the surface, but most use them while buried underneath the surface. The former will use thicker pipes that withstand the risk of mechanical damage, and prolonged exposure to UV radiation. The latter will use PVC pipes of lower thickness because the pipes have very low exposure to mechanical damage, and are not exposed to the sun’s degrading UV radiation. HDPE pipes are best for surface laying
This is given above for those sizes with the most demand
They are categorised according to pressure ratings as; PN6, PN8, PN10, PN 12.5, PN 16, and PN 20. PN 20 has the thickest walls. A farmer using gravity flow will install PN6 because the water flow pressure is low. Another one using a water pump will connect the system with PN8 and above according to the pressure rating of the water pump
The thickest one is the best because it lasts the longest, but it is also the most expensive
Yes because, unlike GI pipes, they do not rust over time. Their key disadvantages are;
Yes they do
The thicker ones with a high-pressure rating will last 100 years
6 months
We supply fittings designed for use with these pipes to join them together, and with other accessories and material. Every fitting is of the same diameter size as the pipe, but always thicker.
Best borehole drilling company As the best borehole drilling company in Kenya, we not only…
Grekkon Limited commercially pioneered Transient Electromagnetic (TEM) Technology in Kenya for use in hydrogeological and…
Our solar water pump price in Kenya is determined by these specifications; water flow rate,…
Grekkon Limited's solar powered irrigation system (SPIS) for agriculture in Kenya utilises solar energy as…
How does drip irrigation work is a common question we get from new farmers. Drip…
Potato farming in Kenya through irrigation is done by overhead sprinklers, rain hose kits, or…
View Comments
I am located in Rwanda,,,and we have project of 100 apartment but our consultant instructed to use metro pipes and ftgs in both plumbing and electrical,,,,can I get your catalogue just to check up your product quality?
Dear Samual,
Metro pipes are used for waste water movement, so th specs are different. Ours are irrigation grade pipes.
Best regards,
Customer Servic
hey guys,want to enquire on quotation for passion fruit drip lines 800m plus adjustable button drippers 400pcs
Dear Sidney,
Your 16mm HDPE line is Kes 16,000, and he button drippers are Kes 8,000. Total Kes 24,000. When do you need these and where are you located sir?
Best regards,
Customer Service
Hello how much does it cost 40mm and 8m long and 15m long pvc pipe.
Dear Peter,
All PVC pipes as quoted are 6M long.
Best Regards,
Customer Service
Hi. Kindly assist with price of the following
1. PVC pipe Pn 12.5, 3"
2. Pvc pipe 2"
3. Nipple GI, 3"
4. Gate valve 3", pegler
5. Gate valve 2", pegler
Good evening Ali,
These PVC pipes and fittings prices will be shared with you on email
Best regards,
Cuatomer Service
Give me the price of 2" and 1.5"heavy duty plastic pipe for irrigation
Dear Mwaniki,
We have various heavy duty thicknesses. Please specify your choice
Best regards,
Customer Service
Am looking for a water horse pipe 1/2 inch around 1000feet Please send me
Dear Peter,
Good morning, we do not unfortunately supply domestic water hose pipes.
Best regards,
Customer Service
Class 41 heavy duty 6 and 4 inch PVC pipes each 6 meter. Pls give me the prices.
Thanks for availing vital info to prospective customers especially with regard to pricing. It is very useful and I have learnt a lot from this.
I wanna use 30 hp water pump from source that is roughly 1,500 metres away to my farm, but I have realized PN is also a factor to consider to have the right pipe. All pipes will be underground ( 800 metres 3" inches from the source and 700 metres 2½" inches to the farm). Which is the best PN size that is suitable considering underground and PN cost?
Also, I'm in the lowest sides of Kirinyaga county, do you have free delivery for your products?
I'm talking of all pipes being HDPE.
Can I also know your latest updated prices as at September 2021?
Please try to answer all of the 3 questions or concerns that I have raised above.
Regards,
Dear Davika,
Thank you for your inquiry and compliments. Your 30Hp diesel water pump is a large one. PN10 is the best for such, though also the most expensive. Your alternative in case of budget constraint is PN8.
We'll provide free delivery for that quantity from our Nyeri store. Our HDPE pipes prices per 100M roll are;
1. 90mm/ 3" PN10 Kes 50,000, PN 8 Kes 40,000
2. 75mm/ 21/2" PN 10 Kes 35,000, PN 8 Kes 30,000
We look forward to being of service to you.
Best regards,
Customer Service
How much does it cost for pressure pipe
1 inch
Tee 1 inch
Elbow 1 inch
Dear Titus,
Good morning and thank you fo ryour enquiry. Our prices are;
1. 32mm HDPE 100M pipe is Kes 4,900
2. 32mm HDPE Tee is Kes 389
3. 32mm HDPE Elbow is Kes 273
How many units of each do you need and where are you located?
Best regards,
Customer Service
200 mm waste pipe what's the cost and how long is a pc.
I want pipe which can drain cow dug
Need 30pipes 21/2' and 20pipes 3' classB
Home Ngurubani,mwea kirinyaga county
What's the price and your contact
Dear Stanley,
Yes we have 2.5"/ 75mm and 3"/ 90mm PVC pipes available. We'll supply you from our Nyeri store. Our contact is 0777 157 132.
Best regards,
Customer Service
Do you have PVC Waste pipe 8" (DN 200) Class 41 Heavy Duty? What is the price for a pipe of 6meters?
Hi. Which is the best pipe to use ppr or pvc to connect water from tank to the shamba?
Good afternoon John,
Irrigation grade PVC pipes. PPRs are designed for home plumbing.
Best regards,
Customer Service
Dear John,
Yes we have the PVC pipes priced for Kes 7,000 a pipe. How many units do you need?
Best regards,
Customer Service